Rode VideoMic GO Rycote Lightweight On-Camera Shotgun Microphone

Top Selling Products

K&F Concept 43mm KF01.1419 Classic Series Blue Multi-Coated Professional HMC UV Filter

৳990.00
Yongnuo YN 50mm f/1.8 Lens for Canon Mount – Black

৳22,000.00
Ye YUER Heavy Studio Light Stand

৳1,999.00
Simpex 8×12 feet Professional Studio Background’s Backdrop Only – Green

৳1,399.00
Audio-Technica ATH-AD500X Audiophile Open-Air Headphone – Black

৳16,799.00
Ye Ac Power Cable for Battery Charger (4.5 Feet)- Black

৳99.00

Description reviews

Rode VIDEOMIC GO Rycote Lightweight Shotgun Microphone Price in Bangladesh

Longer than Rode’s VideoMicro and with a narrower pickup pattern, the Rode VideoMic GO camera-mount shotgun microphone offers enhanced off-axis rejection for tighter directionality. Like the VideoMicro, it runs on plug-in power and has no controls or switches, making it well suited for mobile journalists, vloggers, and run-and-gun shooters in a hurry.

This compact and lightweight shotgun microphone features an integrated shockmount that mounts directly to your DSLR, mirrorless, or video camera and reduces noise from vibrations and camera handling. The windscreen design reduces wind noise, making it well suited for outdoor shoots. The detachable coiled 3.5mm TRS cable ensures easy hookup to your camera, and the dual-mono output means that no channel selection is necessary on your recording device.

Shotgun Mic with Directional Sound Pickup

Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.

Easy Hookup to Camera

A detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.

Runs on Plug-In Power

No batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.

Integrated Shockmount Inhibits Vibrations

Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8″ thread, ensuring easy attachment to your camera or a boompole such as Rode’s Micro Boompole (available separately).

Windscreen Minimizes Wind Noise

The VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).

Connectivity Options

Expand the microphone’s device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs.

Rode VideoMic GO Specs

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Line Gradient
Capsule	Electret Condenser
Diaphragm	0.5″ / 12.70 mm
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State (JFET)
Pad	None
High-Pass Filter	None
Tone Adjustment	None
Gain Adjustment	None
Indicators	None
On-Board Controls	None
Windscreen	Foam (Included)

Performance

Frequency Range	100 Hz to 16 kHz
Maximum SPL	120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection	4 dB at 60° 16 dB at 120° 12 dB at 180°
Sensitivity	-35 dBV/Pa at 1 kHz
Dynamic Range	96 dB
Signal-to-Noise Ratio	60 dB A-Weighted
Equivalent Noise Level	34 dB A-Weighted

Connectivity

Output Connectors (Analog)	1 x 1/8″ / 3.5 mm TRS
Cable Length	7.87 to 13.78″ / 20 to 35 cm
Number of Conductors	2
Wireless Connectivity	None

Power

Operating Voltage	2.5 V
Operating Current Consumption	330 µA (Plug-In Power)

Physical

Color	Black
Mounting	Camera/Shoe-Mount, Shockmount (with Included Hardware)
Mounting Thread Size	3/8″-16 Female
Included Case	None
Construction Material	ABS
Dimensions	ø: 3.11 x L: 6.57″ / ø: 79 x L: 167 mm
Weight	2.58 oz / 73 g

Packaging Info

Package Weight	0.43 lb
Box Dimensions (LxWxH)	9.95 x 4.9 x 2.9″

In the Box

Rode VideoMic GO Camera-Mount Shotgun Microphone
Coiled 3.5mm TRS Cable

Categories: Microphones, Pro Audio Tags: audio accessories price in bd, best microphone, best microphone pr

hkphotovideoaudio.com

Download

There have been no reviews for this product yet.

Rode VideoMic GO Rycote Lightweight On-Camera Shotgun Microphone

K&F Concept 43mm KF01.1419 Classic Series Blue Multi-Coated Professional HMC UV Filter

Yongnuo YN 50mm f/1.8 Lens for Canon Mount – Black

Ye YUER Heavy Studio Light Stand

Simpex 8×12 feet Professional Studio Background’s Backdrop Only – Green

Audio-Technica ATH-AD500X Audiophile Open-Air Headphone – Black

Ye Ac Power Cable for Battery Charger (4.5 Feet)- Black

Rode VIDEOMIC GO Rycote Lightweight Shotgun Microphone Price in Bangladesh

Rode VideoMic GO Specs

In the Box

Related products

MOZA MIRFAK Audio N4 Ultracompact Camera-Mount Bidirectional Both Side Shotgun Professional Microphone for Camera and Smartphone

BOYA BY-BM6060 Super-Cardioid Condenser Professional Shotgun XLR Boom Microphone

Rode VideoMic Pro Rycote Compact Directional Camera-Mount Shotgun Microphone

Contact Info

Quick Link

My Account